Hydrocarbon Solvent Recovery Device, Hydrocarbon Solvent Distillation Recovery Machine

• Customization: Available
• After-sales Service: Remote Assistance
• Warranty: Remote Assistance
• Model NO.: SRD-80
• Object: Detergent Powder
• Separation Mode: Filter Type
• Operating Type: Continuous Type
• Installation: Tripod
• Centrifuge Type: Tube Centrifuge
• Distillation Equipment Type: Steam Distillation Equipment
• Extraction Tower Type: Vibration Plate Tower
• Pressure: Low Pressure
• Condition: New
• Transport Package: Sea Transport
• Specification: 113*80*112
• Trademark: LIHEDA
• Origin: China
• HS Code: 8419899090
• Production Capacity: 100cover/Year

Product Description

SRD-80(EX)Explosion-proof solvent recovery device
Models:SRD-80EX	Single processing capacity:80L	Single processing time:3.5H
Liheda (Dongguan) Environmental Protection Equipment Co. , Ltd.

1. Technical characteristics:

Single processing capacity:	80L
Distillation chamber material (waste liquid contact):	Stainless steel
Cooling chamber material (distillate contact):	Copper heat exchanger (optional stainless steel heat exchanger)
Power supply voltage:	6.7KW  380V 50/60HZ
Sheet metal construction:	Stainless steel
Heating mode and medium:	Jacket heating-hot kerosene
Type of evaporation:	Evaporation at atmospheric pressure
Single feed capacity:	80L
Single processing time:	3.5Hr
Recovery rate:	95%(Except solute)
Cooling mode:	Air cooled fin cooling
Operation Control:	PLC and human-machine interface intelligent control
Noise:	68 db (a) measured at 1 m from the mechanical surface and 1.6 m from the ground
Layout method:	Manual dump type

   
 

1.  nominal performance (factory test performance):

The data in the following table are performance indicators obtained using tap water as process water.

Power supply	Unit	380V   50/HZ
Single feed capacity	80L	80±10%
Single processing time	Hr	4.0H±10%
Air flow around the radiator	Good ventilation conditions	Heat dissipation

1. Function description: using distillation principle and heat exchange cooling principle, the waste solvent is recovered and reused.
2. 

3.1 Process schematic diagram:

3.2 acket type heat exchange distillation barrel
    Adopting double-layer barrel design, the jacket space is formed inside, and the jacket space is filled with hot kerosene medium for indirect heating, heat is transferred to the solvent to be evaporated by boiling through a hot kerosene medium;
3.3 Cooling heat transfer mode
   Cooling and heat exchange way, using fin copper tube radiator, explosion-proof fan will become steam solvent condensation collection; (note: when ordering please specify cooling and heat exchange way: choose stainless steel fin heat exchanger or tubular heat exchanger)

1. Options and accessories

Number	description	function	Notes
1	Pneumatic diaphragm pump and level sensor	Realize automatic feeding
2	Vacuum relief device	Realize negative pressure distillation and solvent storage

1. Dimensions, weight, packing, storage and handling

Type	Size(MM)	weight(KG)
unpacked	830*540*1140mm	165

  If the device needs to be stored for a long time before installation, keep it indoors in a clean and dry area with a temperature range of 5-35 ° C and a relative humidity range of 20%-80%. The distillation equipment needs to be moved with forklifts of appropriate length;

1. Installation requirements

The machine is designed to be installed in the safe area of non-corrosive atmosphere, and the indoor horizontal surface is smooth, which can support the weight of the equipment itself. There must be a space around the equipment to ensure that users and maintenance personnel work smoothly, and to allow cold air to pass through the fan; There is no obvious open flame around the equipment, and explosion-proof places are required;